Material Characteristics: Compressive strength ≥150MPa,high abrasiveness, high crushing energy consumption
• Model Selection: DG600, DG750, or larger models (e.g., DG800)
• Wear Parts Material: High-manganese steel (Mn13Cr2) or composite alloy
• Speed Adjustment: Optimize eccentric speed for hard materials
Case Study: A granite quarry in Indonesia uses DG750 Single-Cylinder Hydraulic Cone Crusher, achieving a crushing efficiency of 95% and reduced downtime with hydraulic control.
Material Characteristics: Compressive strength 50-150MPa,low silicon content, easy to produce powder
• Model Selection: DG400, DG500, or DG600 (depending on capacity needs)
• Dust Prevention: Add a spray dust suppression system
• Capacity Improvement: Adjust eccentric speed to 250-280rpm for better throughput
Case Study: A limestone processing plant in China uses DG500 Single-Cylinder Hydraulic Cone Crusher, increasing capacity to 180t/h by optimizing the discharge port to 15mm and adjusting the eccentric speed to 270rpm.
Typical Materials: ▸Iron ore▸Copper ore▸Granite
Applications: Secondary and tertiary crushing in mining operations,ore sizing for beneficiation plants
Typical Materials: ▸Limestone▸Sandstone▸Gravel
Applications: Aggregate production for construction and highways,sand and gravel crushing for concrete and asphalt
*The output will vary according to different materials, feed particle size and other factors
Model | Cavity Type (super coarse type) |
Feed Opening Size(mm) | Min.Discharge Part (mm) | Capacity(t/h) | Power(kw) |
Standard Cavity Type | |||||
CH420 (DG100) |
Coarse | 150 | 16 | 60-125 | 75 |
Medium | 100 | 14 | 50-100 | ||
Fine | 60 | 10 | 40-90 | ||
CH430 (DG200) |
Coarse | 185 | 16 | 70-200 | 160 |
Medium | 150 | 14 | 60-170 | ||
Fine | 80 | 10 | 45-110 | ||
CH440 (DG300) |
Coarse | 220 | 20 | 200-400 | 220 |
Medium | 175 | 16 | 110-330 | ||
Fine | 120 | 12 | 80-280 | ||
CH660 (DG500) |
Coarse | 275 | 20 | 170-670 | 315 |
Medium | 135 | 16 | 190-510 | ||
Fine | 85 | 12 | 200-320 | ||
Speical Coarse Cavity Type | |||||
CHS430 (DG200S) |
Special Coarse | 300 | 25 | 230-350 | 160 |
Medium Coarse | 240 | 22 | 170-280 | ||
CHS440 (DG300S) |
Special Coarse | 400 | 41 | 450-530 | 250 |
Medium Coarse | 350 | 29 | 360-420 | ||
CHS660 (DG500S) |
Special Coarse | 480 | 50 | 650-1000 | 315 |
Medium Coarse | 380 | 45 | 500-800 |
Profession Achieves High Quality | Built Tough | Works Smarter